Ohio Willow Wood Adapter (#3003)
Required for use with Flexion and 12-Hole Adapters.

Locking Pin Tapped (#3005)
Bionix will tap your Locking Pins for use with Donning Aids.

Lanyard Adapter System for Flexion Round Adapter Kits (#3010)
Don't want to use a lock with our Flexion Lock Adapter Kit? Try our Lanyard
Adapter System.

Angle Disks (#3015)
Angle Disks provide the prosthetist with 3^o, 5^o and 7^o of flexion/extension
or abduction/adduction adjustment.

Donning Aid Kit (#3025)
Bionix Donning Aids were designed to assist patients using the RapidFit
Flexion Length Offset Lock & Lock Adapter in donning their lock. Our donning
aids have threads to screw into the locking pin for a secure connection.
This allows the patient to direct the donning aid through the locking pin
opening, and then slide his/her limb into the socket as the donning aid is
pulled through the lock and removed once secure.

1/4 inch Spacer with 4 Long 6mm Screws (#3020)
The 1/4" Spacer extend the bottom of the RapidFit^® Adapters to provide
extra space for suction valves and pin covers.

Air Expulsion Adapter with Lyn Valve (#3030)
An Air Expulsion Adapter fits the Standard Center Hole and uses a Lyn
valve to provide suction. One 1/4" spacer (3020) is included.

Pin Covers With Spacers (#3035)
Three Pin Covers sizes that fit the center hole in all RapidFit^® Adapters
will close off the socket and provide suction.

Align-Right Sets For Standard Size Lock Mechanism (#3040)
Align-Right For Smaller Lock Mechanisms (#3045)
The RapidFit^® Align-Right system maintains a consistent lock alignment
from the Cast or Test Socket to the final Thermoplastic or Lamination Socket.
The Plastic Anchor placed in the cast or test socket becomes part of the
plaster mold and maintains the same align ment as the cast/test socket with
various length bolts attached to the lock and the anchor in the plaster mold.

Pedestal Stand w/4 Hole Attachment (#3065)
Allows Prosthetist to attach a telescopic pylon to stand for the purpose of
evaluating patient in check socket when reusable adapters are used.

LengthRight Set (#3070)
The solution to shrinking thermoplastics. Aluminum adapters formed into
socket provide a cutting line and ability to lengthen socket.